Summary: This article explains how to properly apply Tithely Tap Discs (NFC tags) to chairs, especially fabric surfaces, to ensure a strong and long-lasting adhesive bond.
Before You Begin
- Warm Weather Note: If your Tithely Tap Discs tags arrived during a warm season, let them rest in a cool, climate-controlled room (65–75°F) for at least 24 hours before applying. Heat can soften the adhesive, and this rest period allows it to re-harden and regain full tackiness.
- Fabric Chairs: If you are applying to fabric, ensure you are using the fabric-specific adhesive version of Tithely Tap Discs.
- Clean Surface: Make sure the chair surface is free from dust, lint, or moisture. A quick wipe with a dry cloth is recommended.
Step-by-Step Instructions
- Clean the Chair Surface. (Wipe the target area with a dry cloth to remove any dust or lint, especially on smooth or vinyl chairs.)
- Peel the Tithely Tap Discs from its backing. (Be careful not to touch the adhesive with your fingers, as oils can weaken the bond.)
- Position the Tithely Tap Discs on the chair. (Choose a flat, easily accessible area, like the top backrest. Once it touches the surface, repositioning will be difficult.)
-
Apply Firm Pressure across the entire tag for 15-30 seconds.
This is the most crucial step. Press down firmly, especially on the edges, to activate the pressure-sensitive adhesive and help it bond to the surface. For fabric, press deeply into the texture.
- Let the Adhesive Cure. (For best results, avoid heavy use or excessive touching of the Tithely Tap Discs for a few hours. The bond will continue to strengthen over time.)
Troubleshooting & FAQs
- My tags arrived on a hot day and the adhesive feels gummy. What should I do? This is normal. The adhesive is pressure-sensitive and softens with heat. Place the tags in a cool, climate-controlled room (65–75°F) for at least 24 hours before applying them. This lets the adhesive stabilize and regain its proper tackiness.
- What if I'm applying to fabric chairs? Even when using our fabric-specific adhesive tags, the "Apply Firm Pressure" step is critical. Press deeply into the fabric's texture with your hand flat on the Tithely Tap Discs and hold for at least 15-30 seconds to ensure a strong bond.